Graph-tech Bridge Pin Manuel d'utilisateur télécharger pdf

NEED HELP? Contact GRAPH TECH GUITAR LABS at 604-940-5353, via e-mail at

sales@graphtech.com, or consult our website at www.graphtech.com

Pull up on the string to slide the ball

end up the bridge pin and anchor it

against the bridge plate, then push the

pin down into the tapered hole. The pin

does not have to be tight to hold the

string firmly. Push gently to seat the pin.

Align the string with the groove in the

bridge pin, and let the ball end extend

beyond the end of the pin. Insert the ball

end and the bridge pin half way into the

tapered hole in the bridge.

Remove your old bridge pins using

your fingers or a pin puller like the one

on the end of most string winders.

Loosen all six strings. Reduce the

tension until they are loose enough that

the notes can no longer be heard when

a string is plucked.

BRIDGE PIN INSTALLATION INSTRUCTIONS

Page 1

NEED HELP? Contact GRAPH TECH GUITAR LABS at 604-940-5353, via e-mail at [email protected], or consult our website at www.graphtech.comPull up on

Pas de commentaire

Graph-tech Bridge Pin Manuel d'utilisateur