Graph-tech Ghost Floyd Rose Manuel d'utilisateur télécharger pdf (Page 1)

INSTALLATION INSTRUCTIONS

1. Insert string end in hole at base of string block cavity.

2. GENTLY tighten screw until it just touches the string.

3. Tighten with allen key an additional 1/4 TURN ONLY.

CAUTION: Excessive tightening is not required to keep string in

place. Overtightening screw may crack the housing and void your

warranty. Questions? Phone 604-940-5353, visit our website at

www.graphtech.com or e-mail sales@graphtech.com

Correct string radius is achieved using three saddle heights.

Saddles are numbered (on the bottom of each saddle)

(lowest height),

2 (middle height) and 3 (highest), and should

be installed in the following order:

(Saddle heights exaggerated slightly for illustration)

Insert string end here.

INSTALLATION INSTRUCTIONS1. Insert string end in hole at base of string block cavity.2. GENTLY tighten screw until it just touches the string.3. Ti

Pas de commentaire

Graph-tech Ghost Floyd Rose Manuel d'utilisateur Page 1