Graph-tech Ghost Manuel d'utilisateur télécharger pdf (Page 13)

When the Hexpander is piggybacked on the Acousti-Phonic, the

mag-to-pin-7 harness is not necessary because Acousti-phonic

passes the acoustic and/or magnetic signals to the Hexpander.

But when you install the Hexpander only, adding the mag-to-

pin-7 harness and an acoustic volume control (250K or 500K

audio pot) provides this feature in the absence of the Acousti-

Phonic. Note that the acoustic sound with the mag-to-pin-7

harness is the raw acoustic sound, and not the true acoustic

sound that the Acousti-Phonic creates. If you want pin-7 to

carry just the mag or just the raw piezo signal, you can

leave the unused wires disconnected and coiled up.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 75 76

Pas de commentaire

Graph-tech Ghost Manuel d'utilisateur Page 13