Graph-tech Ghost Manuel d'utilisateur télécharger pdf (Page 29)

The wires on the ghost® saddles must go into the control cavity

to plug into the Hexpander or into the Acousti-Phonic via the

Summing Board and Dual Connector Cable. Cutting six, small

notches beneath the bridge-side of the pick guard or pickup ring

lets the wires enter an existing cavity neatly and without modifying

the body. Notches can be cut with a Dremel-type rotary tool or by

hand with a needle le. Remove the pick guard or pickup ring from

the instrument body for this operation. We recommend removing

the pickup from the pickup ring to prevent damaging the pickup.

Saddles

Notching the pick guard or pickup ring

Notched

Pick Guard

Notched

Pickup Ring

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 75 76

Pas de commentaire

Graph-tech Ghost Manuel d'utilisateur Page 29