Graph-tech Ghost Manuel d'utilisateur télécharger pdf (Page 43)

Use the colored wire on the Extension Harness to make

sure it is oriented properly, extending the pickup wires

without reversing them. The blue wires of the pickups must

be connected to the ground side on the ghost® boards.

Extension harness *optional*

The silver wire is signal; the blue wire is ground. If you can’t tell

which is which, try holding the wire at a dierent angle, or in a

dierent light.

Signal/ground color code

Connects all the saddle pickup signal wires together, and all

the ground wires together, then the Dual Connector Cable (a

small wire with a plug on each end) connects the Summing

Board to the Acousti-Phonic. Note the Summing Board and Dual

Connector Cable are not used when installing the Hexpander,

or when the Hexpander is piggybacked on the Acousti-phonic.

Summing Board

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Pas de commentaire

Graph-tech Ghost Manuel d'utilisateur Page 43